FundamentholLog inStart lesson 1 freeBack to app

Carboxylic Acid Derivatives

ChemistryCarboxylic Acids And Their Derivatives
For NEET aspirants

Carboxylic acid derivatives are compounds in which the -OH of the acid is replaced by Z = -Cl (acid chlorides), -OCOR (anhydrides), -OR' (esters) or (amides). All of them react by nucleophilic acyl substitution, and their reactivity falls in the order acid chloride > anhydride > ester > amide, which also decides which derivative can be made from which. JEE Main questions on these derivatives have asked for their order of reactivity and about the hydrolysis of amides. JEE Advanced questions have asked about the reduction of esters and the saponification of a fat.

On this page1The four derivatives2Reactivity order3Acyl chlorides4Anhydrides5Esters6Amides7Summary8Exam practice
Key Formulas - Quick Reference
  1. ★ Must learn Reactivity: RCOCl > > RCOOR' >
  2. ★ Must learn (amide from an acid chloride)
  3. (an anhydride transfers one acyl group)
  4. ★ Must learn (saponification, irreversible)
  5. (transesterification)
  6. ★ Must learn (hydrolysis of an amide)
  7. (3° alcohol)
  8. ★ Must learn (an ester gives two alcohols)
  9. (a fat gives soap and glycerol)

1. What are Carboxylic Acid Derivatives?

There are four carboxylic acid derivatives, generally represented as , where Z is a halogen (usually Cl), -OCOR', -OR' or (or -NHR', ). All of them contain the acyl group and are readily converted back into the acid by hydrolysis.

  • Z = halogen (usually Cl): acid chlorides (acyl chlorides).
  • Z = -OR': esters.
  • Z = -OCOR': carboxylic acid anhydrides.
  • Z = : amides; when Z is -NHR' or , they are N-substituted amides.

Carboxylic acid derivatives are prepared from carboxylic acids; those preparation methods appear under the chemical reactions of carboxylic acids. On hydrolysis each derivative gives the acid back. The other product shows what Z was, as the next example shows.

Solved Example 1
Four derivatives of 2-methylpropanoic acid, , are labelled A, B, C and D. Each one is hydrolysed. A gives the acid and HCl. B gives two molecules of the acid and nothing else. C gives the acid and methanol. D, , boiled with dilute acid, gives the acid and ammonium ions. Identify A, B, C and D, and name the class of each.
Solution:

Hydrolysis replaces Z in by -OH. The second product is H-Z (or its ion), so it shows what Z was. Here R is every time.

A: HCl forms, so Z = Cl. A is 2-methylpropanoyl chloride, , an acid chloride.

B: a second molecule of the same acid forms, so Z = -OCOR. B is 2-methylpropanoic anhydride, , an acid anhydride.

C: methanol forms, so Z = . C is methyl 2-methylpropanoate, , an ester.

D: ammonia forms, and the acid turns it into , so Z = . D is 2-methylpropanamide, , an amide.

2. Relative Reactivity of Acid Derivatives

Reactivity towards nucleophilic acyl substitution follows the order RCOCl > > RCOOR' > . Substitution takes place in two steps: (a) the nucleophile adds to the electron-deficient carbonyl carbon, forming a tetrahedral intermediate, and (b) the intermediate eliminates the leaving group, regenerating the C=O. Step (a) is favoured by electron withdrawal and hindered by +I groups or bulky groups; step (b) depends on the leaving group. Two facts explain the order:

  • Basicity of the leaving group: the weaker the base, the better it leaves. Basicity follows , so reactivity runs the other way, and , the weakest base, makes acid chlorides the most reactive.
  • Resonance: the lone pair on the atom joined to the carbonyl carbon is delocalised into C=O, giving that bond partial double-bond character and stabilising the derivative. The more stabilisation, the lower the reactivity. Stabilisation is least for acid chlorides, because the large chlorine 3p orbital overlaps poorly with carbon's 2p orbital and chlorine's strong -I effect withdraws electrons; it is greatest for amides, where nitrogen donates strongly.
Relative reactivity of acid chlorides, anhydrides, esters and amides Reactivity towards nucleophilic acyl substitution decreases from acid chloride to anhydride to ester to amide, from fast at the top to slow at the bottom. The leaving groups become stronger bases (pKa of HCl minus 7, carboxylic acid 4.8, alcohol 16, ammonia 38), and lone-pair donation into the carbonyl group, drawn as bars on a rank scale from 0 to 4, increases from chlorine (rank 1, poor 3p to 2p overlap) through the anhydride oxygen shared by two carbonyls (2) and the ester oxygen (3) to nitrogen (4). A downhill arrow shows that each derivative can be converted into those below it. Derivative Leaving group Donation to carbonyl (rank: 1 weakest, 4 strongest) 0 1 2 3 4 R CO Cl acid chloride Cl− pKa −7 3p to 2p: poor overlap R CO OCOR anhydride RCOO− pKa 4.8 O shared by two carbonyls R CO OR' ester R'O− pKa 16 O donates well R CO NH2 amide NH2− pKa 38 N donates strongly fast slow Weaker base as leaving group + weaker resonance = more reactive. A derivative can be converted into any derivative below it (downhill arrow).
Figure 1: Reactivity of acid derivatives depends on leaving-group basicity and lone-pair donation into the carbonyl group.
Nucleophilic acyl substitution is catalysed by acids, because protonating the carbonyl oxygen makes the carbon more electrophilic for step (a).
Solved Example 2
Acetyl chloride reacts with water more readily than methyl chloride does. Explain.
Solution:

Alkyl halides are much less reactive than acyl halides in nucleophilic substitution. Attack on the tetrahedral carbon of RX goes through a hindered transition state, and a bond must be partly broken to let the nucleophile attach. In , the nucleophile attacks the flat carbonyl carbon through a relatively unhindered transition state, and the substitution happens in two steps: the first is like addition to a carbonyl compound, and the second is loss of chloride.

Mechanism of hydrolysis of acetyl chloride Water attacks the carbonyl carbon of acetyl chloride with an oxygen lone pair while the C=O pi electrons move onto oxygen, giving a tetrahedral intermediate with O minus and OH2 plus. The oxygen lone pair re-forms the carbonyl bond and chloride departs with the C-Cl bond pair (elimination), giving the protonated acid; loss of a proton gives acetic acid and HCl. Addition to the flat carbonyl carbon is much easier than the crowded SN2 transition state of methyl chloride. C O H3C Cl H2O acetyl chloride + water addition C O H3C Cl OH2 tetrahedral intermediate −Cl− elimination C O H3C OH2 −H+ C O H3C OH + HCl Why faster than CH3Cl? Water adds to a flat, unhindered carbonyl carbon first; CH3Cl must reach a crowded five-coordinate SN2 transition state in one step, partly breaking the C and Cl bond while the new bond forms. − + +
Figure 2: Hydrolysis of acetyl chloride by nucleophilic addition-elimination.
Solved Example 3
Suggest likely mechanisms for: (a) (b)
Solution:

(a) Ammonia adds to the carbonyl carbon of pentanoyl chloride (step a). The tetrahedral intermediate carries and . The C=O bond then re-forms, and leaves (step b). A second takes a proton from nitrogen. This gives pentanamide and , which pairs with . That is why two moles of ammonia are used.

(b) Acid protonates the carbonyl oxygen of methyl butanoate. This makes the carbonyl carbon more electrophilic. Water adds to it and gives a tetrahedral intermediate. A proton then moves to the oxygen. Methanol leaves, and the C=O bond re-forms. Loss of gives butanoic acid and frees the catalyst. Every step is reversible: these are the steps of esterification, run backwards.

Solved Example 4
The rate of alkaline hydrolysis (with aqueous NaOH) is greatest for:
(a) ethyl ethanoate,
(b) ethyl chloroethanoate,
(c) ethyl dichloroethanoate,
(d) ethyl 2-methylpropanoate,
Solution:

Answer: (c). Hydroxide attacks the carbonyl carbon in the first step. A group that withdraws electrons makes this carbon more positive and speeds the attack. Each Cl atom withdraws electrons by its -I effect, so two Cl atoms help more than one. The two methyl groups of (d) release electrons (+I) and crowd the carbon, so (d) reacts slowest. The order is (d) < (a) < (b) < (c).

Exam Trick

The pKa ladder.

Rank the derivatives by the of the leaving group's conjugate acid: HCl (-7), RCOOH (4.8), R'OH (16), (38). The lower the pKa, the faster the reaction, and a derivative can be made only from one above it. Order: CAEA, "Cats Always Eat Apples" (Chloride, Anhydride, Ester, Amide).

Because conversions only run downhill, going uphill needs a detour through the acid:

Flowchart for converting one carboxylic acid derivative into another Decision flowchart, top to bottom: to turn R-CO-Z into R-CO-Y, ask whether Y is below Z on the ladder Cl, OCOR, OR', NH2. If yes, treat R-CO-Z directly with HY (ROH, NH3, RCOO-). If no, the change is uphill: hydrolyse to the carboxylic acid (H3O+, or OH- then H+), convert it to the acid chloride with SOCl2 or PCl5, then react the acid chloride with HY, which is now downhill. Example: amide to ester needs RCOOH, then RCOCl, then R'OH with pyridine. yes no, uphill Have R-CO-Z, want R-CO-Y Is Y below Z on the ladder Cl > OCOR > OR' > NH2? Direct substitution: treat R-CO-Z with HY (ROH, NH3, RCOO−) Hydrolyse to RCOOH (H3O+, or OH− then H+) SOCl2 (or PCl5) → R-CO-Cl, the top rung R-CO-Cl + HY → R-CO-Y (now downhill) Example: amide → ester needs RCOOH, then RCOCl, then R'OH / pyridine
Figure 3: Derivatives convert only downhill (RCOCl → anhydride → ester → amide); to go uphill, return to RCOOH and make the acid chloride first.
Key idea
One mechanism (addition, then elimination) and one ladder, RCOCl > anhydride > ester > amide, explain every reaction on this page.

3. Acyl Chlorides

Preparation

Acid chlorides are prepared from carboxylic acids with , or , often with pyridine to remove HCl.

Acylation reactions

Acyl chlorides are the most reactive acid derivatives, so they are often chosen as the starting material for preparing any other acid derivative. The acyl group is transferred to the nucleophile, and HCl (or a chloride salt) is released.

Acetylation of salicylic acid with acetyl chloride gives acetylsalicylic acid (aspirin): the phenolic -OH becomes .

Reaction map of acyl chlorides An acyl chloride RCOCl at the top and nine reactions below it, each with its reagent over an arrow and its products: a carboxylate salt RCOONa gives the anhydride and NaCl; R'OH with pyridine gives the ester and HCl; two moles of ammonia give the amide and NH4Cl; a primary or secondary amine gives the N-substituted amide; water gives the acid and HCl; benzene with anhydrous AlCl3 gives the aryl ketone C6H5COR and HCl (Friedel-Crafts acylation); H2 over Pd/BaSO4 gives the aldehyde and HCl (Rosenmund reduction); LiAlH4 or NaBH4 gives the primary alcohol RCH2OH; aqueous silver nitrate gives a white precipitate of AgCl. R C O Cl acyl chloride RCOONa (RCO)2O + NaCl R'OH, pyridine RCOOR' + HCl 2NH3 RCONH2 + NH4Cl R'NH2 or (R')2NH RCONHR' / RCON(R')2 H2O RCOOH + HCl C6H6, anhyd. AlCl3 C6H5COR + HCl H2, Pd/BaSO4 RCHO + HCl LiAlH4 or NaBH4 RCH2OH aq. AgNO3 AgCl (white ppt)
Figure 4: Reaction map of acyl chlorides, the most reactive acid derivatives. The General Methods of Preparation of Aliphatic Aldehydes and Ketones page teaches the route to RCHO. The Preparation of Aromatic Aldehydes and Ketones page teaches the route to the ketone.

Friedel-Crafts acylation

With anhydrous , an acyl chloride acylates benzene and gives an aromatic ketone. The Preparation of Aromatic Aldehydes and Ketones page teaches this Friedel-Crafts acylation.

Reaction with alkenes

Beyond the 2026 syllabus (JEE Main, JEE Advanced and NEET)

With a Lewis acid catalyst, acetyl chloride adds to an alkene and gives a chloro ketone.

Reduction

With , hydride first gives the aldehyde, which is reduced further to the primary alcohol. Hydrogen over palladium poisoned with stops at the aldehyde (Rosenmund reduction). The General Methods of Preparation of Aliphatic Aldehydes and Ketones page teaches it.

Reactions with KCN, silver nitrate and diazomethane

Aliphatic acid chlorides are readily decomposed by water, so an aqueous solution gives a white precipitate of AgCl with .

Beyond the 2026 syllabus (JEE Main, JEE Advanced and NEET)

These notes leave out the reactions of acyl chlorides with KCN and with diazomethane.

Solved Example 5
Butanoyl chloride is added to aqueous silver nitrate. What do you see? Write the equation. Would 1-chlorobutane behave in the same way?
Solution:

Water hydrolyses an acyl chloride at once. Butanoyl chloride gives butanoic acid and HCl. The chloride ions meet and give a white precipitate of AgCl.

1-Chlorobutane gives no precipitate at once. Water replaces its chlorine only very slowly, because attack at its tetrahedral carbon is hindered (Solved Example 2). So a white precipitate that appears at once shows an acyl chloride.

Solved Example 6
3-Methylbutanoyl chloride is treated with , and then with dilute acid. The main organic product is:
(A) 3-methylbutanal
(B) 3-methylbutan-1-ol
(C) 3-methylbutanoic acid
(D) 2-methylbutan-1-ol
Solution:

Answer: (B). Hydride first gives the aldehyde. does not stop there, so the aldehyde is reduced on to the primary alcohol. The carbon chain does not change, so (D) is wrong.

Solved Example 7
Compound (A) is an acid chloride, RCOCl, in which R is an alkyl group. 1.85 g of (A) is warmed with excess water. The solution then needs 40.0 mL of 1.00 M NaOH for neutralisation. reduces (A) to (B). (A) reacts with (B) to give (C). Identify (A), (B) and (C). (Atomic masses: H 1, C 12, O 16, Cl 35.5.)
Solution:

Water gives two acids from each molecule of A: the carboxylic acid and HCl. So one mole of A uses two moles of NaOH.

Moles of NaOH = mol. So A is 0.0200 mol, and its molar mass is .

The -COCl group has mass . So R has mass , which is . A = propanoyl chloride, .

reduces A to the primary alcohol: B = propan-1-ol, . A then acylates B: C = propyl propanoate, .

Quick Recall: tap to check
What does an acyl chloride give with ?
The primary alcohol, : the aldehyde formed first is reduced further.
Why does acetyl chloride fume in moist air?
It is hydrolysed at once to acetic acid and HCl gas.
What does an acyl chloride give with excess ammonia?
The amide, , and ammonium chloride.

4. Acid Anhydrides

Preparation

Acid anhydrides are considered to be derived from two molecules of carboxylic acid by removal of one molecule of water.

In the second reaction the carboxylate ion acts as the nucleophile at the acyl carbon of the acid chloride. Cyclic anhydrides form simply by heating the dicarboxylic acid when a five- or six-membered ring results: succinic acid (300 °C) gives succinic anhydride and phthalic acid (230 °C) gives phthalic anhydride.

Reactions

Anhydrides are good acylating agents; their reactions are less vigorous than those of acyl chlorides. They are used to prepare esters and amides, and they are hydrolysed back to acids.

Reactions of acid anhydrides transfer one acyl group When an anhydride reacts with H-Nu, one acyl group is transferred to the nucleophile and the other leaves as a carboxylic acid. With an alcohol it gives an ester and an acid; with two moles of ammonia, an amide and an ammonium carboxylate; with water, two moles of acid; with hydroxide, two carboxylate ions and water. R CO O CO R + H Nu R CO Nu + R COOH R'OH ester RCOOR' + RCOOH 2 NH3 amide RCONH2 + RCOO−NH4+ H2O acid RCOOH + RCOOH 2 OH− RCOO− + RCOO− + H2O Only one acyl group is transferred; the other leaves as the acid or its salt
Figure 5: An anhydride transfers only one of its two acyl groups.

Succinic anhydride with ammonia gives ammonium succinamate, which acid converts into succinamic acid, a molecule that is both an amide and an acid.

Solved Example 8
Sodium propanoate + (X) ethanoic propanoic anhydride + NaCl. The compound (X) is:
(A)
(B)
(C)
(D)
Solution:

Answer: (B). The propanoate ion attacks the carbonyl carbon of an acid chloride, and chloride leaves. The anhydride keeps the propanoyl group of the salt and gains the acyl group of the chloride. An ethanoyl group is needed, so X is ethanoyl chloride. (C) would give propanoic anhydride. (A) and (D) are acids with no -COCl group; they would only exchange a proton with the propanoate ion.

Solved Example 9
A neutral compound (A), , reacts with methanol to give a single product (B), . (B) gives with . Hydrolysis of (B) with dilute acid gives methanol and an acid (C), . With excess , one mole of (C) gives two moles of . On heating, (C) loses water and gives back (A). Identify (A), (B) and (C).
Solution:

(C) has two -COOH groups, and on heating it loses water to give (A). So (A) is a cyclic anhydride. A ring of five or six atoms closes easily in this way.

Two dicarboxylic acids have the formula : butanedioic acid and methylpropanedioic acid. Only butanedioic acid can close a five-membered ring. (Methylpropanedioic acid would need a four-membered ring.)

C = butanedioic acid (succinic acid), . A = succinic anhydride.

Methanol opens the ring. One acyl group becomes a methyl ester, and the other becomes -COOH in the same molecule. So a single product forms, and it is both an ester and an acid.

B = 4-methoxy-4-oxobutanoic acid, .

5. Esters

Preparation

Esters are derivatives in which the -OH of the carboxyl group is replaced by -OR, where R may be an alkyl or aryl group.

Beyond the JEE Main and NEET syllabus

Diazomethane in ether turns an acid into its methyl ester.

Many simple esters have pleasant, fruity smells. Esters of benzoic acid are used in perfumery.

A carboxylic acid also adds to 2-methylpropene with an acid catalyst and gives a tert-butyl ester.

Hydrolysis of esters

Acid-catalysed esterification is reversible. Following the esterification mechanism backwards gives the mechanism of acid-catalysed ester hydrolysis.

Base-promoted hydrolysis (saponification). Esters are also hydrolysed by base. The reaction is called saponification because most soaps are made this way. Refluxing an ester with aqueous NaOH gives an alcohol and the sodium salt of the acid.

Saponification is essentially irreversible, because the carboxylate ion is inert towards nucleophilic substitution.

Mechanism of base-promoted ester hydrolysis (saponification) Hydroxide ion uses a lone pair to attack the carbonyl carbon of the ester while the C=O pi pair moves to oxygen, giving a tetrahedral intermediate. The O- lone pair re-forms C=O and the C-OR' bond pair goes to oxygen, so the alkoxide ion R'O- leaves and the carboxylic acid forms. A fast proton transfer from the acid to R'O- gives the carboxylate ion and the alcohol R'OH. The carboxylate cannot be attacked by R'OH, so the reaction is irreversible. R C O OR' OH R C O OH O R' R C O O H + O R' fast proton transfer R COO + R'OH carboxylate cannot be attacked by R'OH: the reaction is irreversible − − − −
Figure 6: Mechanism of saponification. The final proton transfer makes it irreversible.

Saponification equivalent: if an ester is hydrolysed with a known excess of base, the amount of base used up can be measured. It gives the saponification equivalent (equivalent weight) of the ester, the ester counterpart of the neutralisation equivalent of an acid. For an ester with one -COOR' group it equals the molar mass.

Acid hydrolysis ()

Catalytic acid; every step is an equilibrium.

Reversible: the reverse is Fischer esterification. Products RCOOH + R'OH.

Saponification (NaOH)

One mole of base is used up.

Irreversible: the final proton transfer gives , which alcohol cannot attack.

Fats and soaps. Higher aliphatic carboxylic acids, with 12 to 18 carbon atoms, are called fatty acids. Natural fats and oils are esters of fatty acids with glycerol (propane-1,2,3-triol). Each glycerol carries three acyl groups, so a fat is a glyceryl triester.

Boiling a fat with aqueous NaOH saponifies it. This gives glycerol and the sodium salts of the fatty acids. These salts are soaps.

Beyond the JEE Main and NEET syllabus

Hard water contains calcium and magnesium ions. They turn a sodium soap into an insoluble calcium or magnesium soap, which separates as scum. In soft water, soap cleans well. Each soap anion has a long hydrocarbon tail and an ionic head. The tails dissolve in grease, and the heads stay in the water. The grease is held in tiny clusters (micelles) and washed away.

Mechanistic pathways of ester hydrolysis

In most esters, hydrolysis breaks the bond between the acyl carbon and the oxygen of -OR' (acyl-oxygen cleavage). This is true in acid and in base.

  • In acid: the ester is protonated on carbonyl oxygen, water attacks in the slow step, and ethanol is lost from the tetrahedral intermediate (ethyl acetate + ).
  • In base: hydroxide adds to the carbonyl carbon, alkoxide leaves, and proton exchange gives carboxylate + alcohol (saponification).
Beyond the JEE Main and NEET syllabus

Esters of tertiary alcohols can instead break the alkyl-oxygen bond in acid. tert-Butyl acetate gives the tert-butyl cation, which water captures.

Transesterification and ammonolysis

Esters can also be prepared by transesterification, where one alcohol displaces another from an ester. The mechanism is similar to esterification.

Transesterification is an equilibrium reaction. To shift it to the right, a large excess of the alcohol whose ester is wanted is used, or one product is removed from the reaction mixture. Esters also react with ammonia or amines (ammonolysis) to give amides.

Reduction of esters

Both catalytic hydrogenation and chemical reduction give two alcohols. reduces both groups of a keto ester:

likewise reduces phthalic anhydride to benzene-1,2-dimethanol.

Diisobutylaluminium hydride (DIBAL-H), used cold, reduces an ester only as far as the aldehyde. The General Methods of Preparation of Aliphatic Aldehydes and Ketones page teaches this reduction.

Beyond the JEE Main and NEET syllabus

A lactone is a cyclic ester. opens its ring and gives a diol.

Reaction with Grignard reagents

The reaction of an ester with a Grignard reagent is a good method for preparing 3° alcohols. A ketone forms first, but ketones react readily with Grignard reagents, so the final product is a tertiary alcohol.

Reaction of an ester with two moles of Grignard reagent A Grignard reagent R''MgX adds to an ester R-CO-OR' and R'OMgX is lost, giving a ketone R-CO-R''. The ketone reacts faster than the ester, so a second mole of R''MgX adds at once; acid work-up with H3O+ gives a tertiary alcohol carrying two identical R'' groups. Two moles of Grignard reagent are needed; formate esters HCOOR' give secondary alcohols instead. R C O OR' R''MgX −R'OMgX R C O R'' ketone (reacts faster than the ester) R''MgX then H3O+ R C OH R'' R'' 3° alcohol two R'' groups Needs 2 mol RMgX. Formate esters (HCOOR') give 2° alcohols instead.
Figure 7: An ester reacts with two moles of Grignard reagent to give a tertiary alcohol.
Solved Example 10
Write the structures of E and F: , and F benzene-1,4-dicarboxylic acid (terephthalic acid).
Solution:

Saponification gives ethanoate, so E is an ethanoate ester and F is its alcohol part. F has the formula .

Hot turns each carbon side chain of a benzene ring into -COOH. F gives two -COOH groups para to each other, so it has two side chains in para positions. Its eight carbons leave one carbon for each chain. The O atom cannot sit on the ring, because the product has no -OH there. So the chains are and .

F = (4-methylphenyl)methanol, (para). E = (4-methylphenyl)methyl ethanoate, (para).

Solved Example 11
A neutral liquid of formula is hydrolysed to an acid (A) and an alcohol (B). Acid (A) has a neutralisation equivalent of 60. Alcohol (B) has one chiral carbon atom. What is the formula and name of the original compound?
Solution:

A neutralisation equivalent of 60 fits ethanoic acid, (molar mass 60). The alcohol is then .

Four alcohols have this formula: butan-1-ol, butan-2-ol, 2-methylpropan-1-ol and 2-methylpropan-2-ol. Only butan-2-ol, , has a carbon with four different groups.

The ester is butan-2-yl ethanoate (sec-butyl acetate), .

Solved Example 12
An ester of molecular formula on hydrolysis gives an acid (A) and an alcohol (B). Oxidation of (B) with acidified gives an acid (C). The sodium salts of (A) and (C), heated with soda lime, both give benzene. What is the ester?
Solution:

Soda lime replaces -COONa by H. Only sodium benzoate gives benzene, so (A) and (C) are both benzoic acid, .

(B) is oxidised to benzoic acid with no change in carbon count. So (B) is a primary alcohol, phenylmethanol (benzyl alcohol), .

The ester is benzyl benzoate, . Check: .

Solved Example 13
Ethyl ethanoate is heated with a large excess of propan-1-ol and a little conc. . The main product formed from the ester is:
(a)
(b)
(c)
(d)
Solution:

Answer: (a). This is transesterification. Propan-1-ol replaces the ethoxy group, and the ethanoyl group stays. The large excess of propan-1-ol pushes the equilibrium to the right. (b) and (d) would need a new acyl group, which nothing here supplies. (c) would need water, which is not added.

Claisen condensation

Beyond the 2026 syllabus (JEE Main, JEE Advanced and NEET)

An ester with -hydrogens condenses with itself when treated with sodium ethoxide. The product is a -keto ester: ethyl acetate gives ethyl acetoacetate. This is the Claisen condensation, and its ring-closing form is the Dieckmann condensation. The Named Reactions and Rearrangements of Aldehydes and Ketones page explains both.

Acyloin condensation and reaction of keto esters with ammonia

Beyond the 2026 syllabus (JEE Main, JEE Advanced and NEET)

These notes leave out the acyloin condensation and the reaction of -keto esters with ammonia.

Key idea
Esters: hydrolysis (reversible with acid, irreversible with base), two Grignard additions to a 3° alcohol, and reduction by to two alcohols.
Quick Recall: tap to check
What does ethyl acetate give with excess , then ?
2-Methylpropan-2-ol (tert-butyl alcohol) and ethanol.
What does a fat give when boiled with aqueous NaOH?
Glycerol and the sodium salts of its fatty acids, which are soaps.

6. Amides

Preparation

In the laboratory, amides are prepared by the reaction of ammonia with acid chlorides or acid anhydrides. Primary and secondary amines react in the same way; excess ammonia or amine neutralises the HCl formed.

The third route is ammonolysis of an ester, and the last is partial hydrolysis of a nitrile under controlled conditions.

Phthalic acid and ammonia give phthalamide on heating, and phthalimide, a cyclic imide, on strong heating. The Properties of Carboxylic Acids page shows the steps.

Physical properties

All amides except formamide are crystalline solids at room temperature. They have relatively high melting and boiling points because amide molecules are associated by intermolecular hydrogen bonds. The lone pair on nitrogen is delocalised into the carbonyl group, giving nitrogen a partial positive charge; this makes the N-H hydrogens better hydrogen-bond donors, increasing hydrogen bonding and raising the melting and boiling points above those of other acid derivatives.

Basic and acidic character

Amides are very feebly basic, because the lone pair on nitrogen is involved in resonance with the carbonyl group. They form unstable salts with strong inorganic acids, such as , in which the proton is held mainly on oxygen.

Resonance, hydrogen bonding and weak basicity of amides Amide resonance: the nitrogen lone pair moves into the C-N bond while the C=O pi pair moves to oxygen, giving a charge-separated structure with O- and C=N+H2. The C-N bond has partial double-bond character, so the amide group is planar, and the tied-up lone pair makes the amide a very weak base. Amide molecules are linked by intermolecular N-H to O=C hydrogen bonds, so amides have high melting and boiling points and all except formamide are solids. As a very weak base an amide adds H+ at oxygen: RCONH2 with HCl gives the salt RCONH2.HCl. R C O NH2 R C O NH2 partial double bond C to N: planar amide group N lone pair tied up: very weak base Intermolecular H-bonds R C O N H H O C R N H H high m.p. and b.p.; amides are solids except formamide Very weak base Basic: H+ adds to O RCONH2 + HCl → RCONH2.HCl − +
Figure 8: Amide resonance, intermolecular hydrogen bonding and weak basicity.

Hydrolysis, reduction and dehydration

Amides are hydrolysed when heated with aqueous acid or aqueous base.

A cyclic amide (a lactam) opens in the same way. Hot aqueous NaOH breaks the C-N bond of the ring, and acid then gives the amino acid.

reduces an amide to an amine. The Preparation of Amines page teaches this reduction. Sodium borohydride does not reduce an amide.

When heated with , amides are dehydrated to nitriles (cyanides). or also convert amides into nitriles.

Beyond the 2026 syllabus (JEE Main, JEE Advanced and NEET)

With nitrous acid, amides lose nitrogen and give the carboxylic acid; the electrophile is , formed from .

Solved Example 14
Butanamide is boiled with excess dilute sulphuric acid. The products are:
(A) and
(B) and gas
(C) and
(D)
Solution:

Answer: (A). Hot dilute acid hydrolyses the amide to butanoic acid and ammonia. The acid turns the ammonia into at once, so no ammonia gas escapes, and (B) is wrong. Butanoic acid is a weak acid, so in sulphuric acid it stays as RCOOH, not as the ion in (D). A nitrile (C) needs a dehydrating agent such as .

Solved Example 15
An amide (A), , is boiled with aqueous NaOH. A gas (B) is given off, which turns moist red litmus blue. Acidifying the remaining solution gives an acid (C). The sodium salt of (C), heated with soda lime, gives cyclohexane (D). (A) heated with gives (E), . Identify (A) to (E).
Solution:

Soda lime replaces -COONa by H. Cyclohexane forms, so (C) is cyclohexanecarboxylic acid, .

(A) is an amide of (C). Replacing the -OH of (C) by gives exactly . So (A) is cyclohexanecarboxamide, , and the gas (B) is ammonia.

removes water from a primary amide and gives a nitrile. (E) is cyclohexanecarbonitrile, .

A = cyclohexanecarboxamide; B = ; C = cyclohexanecarboxylic acid; D = cyclohexane; E = cyclohexanecarbonitrile.

Hofmann bromamide rearrangement

An amide with no substituent on nitrogen reacts with in NaOH solution. It gives a primary amine with one carbon atom less. The Preparation of Amines page teaches this Hofmann bromamide reaction.

Exam Trick

Hofmann hacks one carbon.

( C) → ( C). The Preparation of Amines page explains why.

7. Chapter Summary

Mind map of carboxylic acid derivatives Mind map with seven branches: the reactivity order of acid derivatives, acyl chlorides (made from the acid, giving amides with ammonia and alcohols with LiAlH4), anhydrides, ester hydrolysis by acid (reversible) or base (saponification, used to make soap from fats), esters with two moles of Grignard reagent giving a tertiary alcohol, ester reduction by LiAlH4 or by hydrogen over a catalyst, and amides (planar, a very weak base, dehydrated by P2O5 to nitriles, hydrolysed to acids). Acid derivatives Reactivity RCOCl > anhydride > ester > amide weak-base leaving group wins convert only downhill Acyl chlorides from RCOOH + SOCl2, PCl5 + 2NH3 → RCONH2 + NH4Cl LiAlH4 → RCH2OH Anhydrides RCOONa + RCOCl transfer one acyl group Ester hydrolysis H+: reversible OH−: saponification, irreversible fats → soap (saponification) Esters and RMgX 2 RMgX → 3° alcohol Ester reduction LiAlH4 → two alcohols H2, catalyst (industry) Amides planar, very weak base P2O5 → RCN hydrolysis → RCOOH
Figure 9: Mind map of carboxylic acid derivatives: one mechanism (addition-elimination) and one reactivity ladder.
Quick Recall: tap to check
Which derivative is the usual starting point for making the others, and why?
The acid chloride: it is at the top of the reactivity ladder.
What does an anhydride give with an alcohol?
One ester molecule plus one carboxylic acid molecule.
Which reagent dehydrates an amide to a nitrile?
on heating ( or also works).

8. Solved Examples: Exam Practice

Solved Example 16
Formic acid and acetic acid may be distinguished by reaction with:
(A) sodium
(B) dilute acidic permanganate
(C) 2,4-dinitrophenylhydrazine
(D) sodium ethoxide
Solution:

Formic acid contains an aldehyde-like H-C=O unit and is oxidised to , decolourising acidified ; acetic acid is not oxidised. Both acids react with Na and sodium ethoxide, and neither forms a 2,4-DNP derivative. Answer: (B)

Solved Example 17
Which compound reacts fastest with water at room temperature?
(A)
(B)
(C)
(D)
Solution:

Answer: (A). Chloride is the weakest base of the four leaving groups and chlorine donates least into C=O, so acetyl chloride is hydrolysed instantly; the amide needs prolonged boiling.

Solved Example 18
Ethyl acetate is treated with excess and then with dilute acid. The main organic product is:
(A) acetone
(B) 2-methylpropan-2-ol
(C) propan-2-ol
(D) butan-2-ol
Solution:

Answer: (B). The first replaces to give acetone, which is more reactive than the ester and adds a second methyl group: . Ethanol is the by-product.

Solved Example 19
Write the balanced equation for the saponification of glycerol tripalmitate, , a fat. How many moles of NaOH does one mole of the fat use, and what are the products?
Solution:

The fat is a triester, so each mole uses 3 mol NaOH. The products are sodium hexadecanoate (sodium palmitate), which is a soap, and glycerol (propane-1,2,3-triol).

Solved Example 20
0.88 g of a neutral ester needs exactly 10.0 mL of 1.00 M NaOH for complete saponification. Find its molar mass and suggest two structures.
Solution:

Moles of NaOH = mol. For one -COOR group, moles of ester = 0.0100 mol, so the saponification equivalent (molar mass) is .

An ester with molar mass 88 has : . Possible structures: ethyl acetate, , or methyl propanoate, (also propyl or isopropyl formate).

Practice Questions
  1. Complete: + →Answer: + HCl
  2. 4-Methylbenzoyl chloride is shaken with excess aqueous NaOH, and the solution is then acidified. What forms?Answer: 4-methylbenzoic acid (its sodium salt forms first, and the acid frees the carboxylic acid)
  3. Acetic anhydride + 2 →Answer: acetamide + ammonium acetate
  4. Ethyl benzoate is boiled with NaOH solution. Give the products.Answer: sodium benzoate and ethanol
  5. Acetamide is heated with . Name the product.Answer: ethanenitrile (acetonitrile),
  6. Pentanamide is boiled with aqueous NaOH. Name the gas given off and the salt left in solution.Answer: ammonia; sodium pentanoate
  7. Methyl propanoate with excess , then dilute acid, gives?Answer: 3-ethylpentan-3-ol, (and methanol)

Common Mistakes to Avoid

Watch out
  • Reversing the reactivity order. It is acid chloride > anhydride > ester > amide; an amide cannot be converted directly into an acid chloride or ester by simple substitution.
  • Saying that leaves easily "because chlorine is electronegative" only. The key reasons are that is a very weak base and that Cl donates poorly into C=O.
  • Using to make an aldehyde from an acid chloride. It goes on to the alcohol. Rosenmund reduction (, Pd/) stops at the aldehyde. The General Methods of Preparation of Aliphatic Aldehydes and Ketones page explains it.
  • Calling saponification reversible. The carboxylate ion formed does not react with alcohol, so it is irreversible; acid hydrolysis is reversible.
  • Counting one mole of Grignard reagent for an ester. Two moles add, giving a 3° alcohol with two identical groups.
  • Mixing an ethyl ester with sodium methoxide, or with methanol and acid, and expecting it to stay an ethyl ester. The alkoxy group is exchanged (transesterification), and the methyl ester forms.
  • Forgetting that only one acyl group of an anhydride is transferred; the other becomes the carboxylic acid or its salt.
  • Keeping the carbon count in the Hofmann reaction. The amine has one carbon fewer than the amide, as the Preparation of Amines page explains.
  • Using one mole of NaOH per mole of a fat. A fat is a triester of glycerol, so its saponification uses three moles of NaOH.

Frequently Asked Questions

Why are acid chlorides more reactive than esters and amides?

Chloride is a very weak base and therefore an excellent leaving group, and chlorine's lone pairs overlap poorly with the carbonyl carbon, so acid chlorides get little resonance stabilisation. Esters and amides have better-donating oxygen and nitrogen atoms and much poorer leaving groups, so they react more slowly.

What is nucleophilic acyl substitution?

It is the reaction type of all acid derivatives. A nucleophile first adds to the carbonyl carbon to form a tetrahedral intermediate, and then the leaving group is expelled as the carbonyl bond re-forms. The net result is replacement of the leaving group by the nucleophile.

Why is saponification irreversible but acid hydrolysis of esters reversible?

In saponification the acid formed is immediately deprotonated to a carboxylate ion, which is negatively charged and not attacked by the alcohol. In acid hydrolysis every step is an equilibrium, and the reverse reaction is simply Fischer esterification.

What is the difference between Claisen and Dieckmann condensation?

This is beyond the 2026 syllabus (JEE Main, JEE Advanced and NEET). Both join an ester enolate to an ester carbonyl to give a beta-keto ester. The Claisen condensation is intermolecular, such as two ethyl acetate molecules giving ethyl acetoacetate. The Dieckmann condensation is intramolecular and forms five- or six-membered cyclic beta-keto esters from diesters. The Named Reactions and Rearrangements of Aldehydes and Ketones page explains both.

How does the Hofmann bromamide reaction reduce the carbon chain?

Bromine and NaOH remove the carbonyl carbon of the amide as carbonate. So the amine has one carbon fewer than the amide. The Preparation of Amines page teaches the steps of this Hofmann bromamide reaction.

Why are amides so weakly basic compared with amines?

In an amide the nitrogen lone pair is delocalised into the carbonyl group by resonance, so it is not free to accept a proton. Amines have a localised lone pair. Amides therefore form only unstable salts with strong acids.

Which acid derivative reactions are important for JEE?

JEE Main questions on acid derivatives have asked for the order of reactivity towards hydrolysis, and about the hydrolysis of amides. JEE Advanced questions have asked about the reduction of esters, and about the saponification of a fat. Several of these come inside multi-step problems. Also learn esters with Grignard reagents and the dehydration of amides.

What should NEET students focus on in acid derivatives?

For NEET, learn how each derivative is made from the acid and hydrolysed back to it. Learn saponification of esters and fats, the reduction of esters with LiAlH4, and the dehydration of amides with P2O5.

Keep going

All concepts in Carboxylic Acids And Their Derivatives →