FundamentholLog inStart lesson 1 freeBack to app

Nomenclature of Functional Groups

ChemistrySome Basic Principles of Organic Chemistry
For NEET aspirants

A functional group is the reactive atom or group of atoms in an organic compound that decides its chemistry and its name. Replacing an H in an alkane with a group G gives : R stays a hydrocarbon skeleton, but G controls the family the compound belongs to. Each family, from alkyl halides through alcohols, aldehydes, ketones, acids and their derivatives, amines and nitriles, has its own naming pattern: most take a secondary suffix (-ol, -al, -one, -oic acid, -amine, -nitrile), while halides, nitro compounds and ethers have none and take a prefix instead (halo-, nitro-, alkoxy-). When more than one functional group is present in the same molecule, an IUPAC priority order decides which becomes the principal group (suffix) and which becomes a substituent (prefix). JEE Main and NEET test it through name-and-structure questions.

On this page1Functional group2Halides3Alcohols4Ethers5Aldehydes6Ketones7Acids8Acid derivatives9Amines10Nitro11Nitriles12Priority order
Key Suffixes and Prefixes: Quick Reference
  1. Alkyl halide: prefix halo- (fluoro, chloro, bromo, iodo). No suffix.
  2. ★ Must learn Alcohol (OH): suffix -ol; prefix hydroxy-.
  3. Ether (ROR'): named as alkoxyalkane; smaller alkyl is the alkoxy prefix.
  4. ★ Must learn Aldehyde (CHO): suffix -al; prefix oxo- when its C is part of the chain, formyl- when it is not.
  5. ★ Must learn Ketone (C=O): suffix -one; prefix oxo-.
  6. ★ Must learn Carboxylic acid (COOH): suffix -oic acid; prefix carboxy-.
  7. ★ Must learn Ester (COOR'): alkyl alkanoate.
  8. Acid halide (COX): alkanoyl halide.
  9. Amide (CONH): alkanamide.
  10. Amine (NH): suffix -amine; prefix amino-.
  11. Nitrile (CN): suffix -nitrile; prefix cyano-.
  12. Nitro (NO): prefix nitro-. No suffix.

1. The Idea of a Functional Group

A functional group is what makes a compound react a particular way. Formally, replace one hydrogen of an alkane skeleton with a group G:

  where R is an alkyl skeleton and G is the functional group.

Every family below is built by picking a specific G, then following the naming template of the family. The parent chain is always the longest continuous chain that contains the principal functional group; the family suffix is added to the name of the parent hydrocarbon (its final drops before a vowel: ethane ethanol), and an ene or yne in the chain stays in the name, as in but-3-en-2-ol. Halides, nitro compounds and ethers have no family suffix: their group is only a prefix (Sections 2, 4 and 10).

Functional group families radiating from an R skeleton An alkyl skeleton R in the middle, with eight functional groups G around it, each giving a family: OH, alcohol; X, halide; CHO, aldehyde; COOH, carboxylic acid; NH2, amine; C triple bond N, nitrile; NO2, nitro; and C=O inside the chain, ketone. R alkyl skeleton −OH alcohol −X halide −CHO aldehyde −COOH carboxylic acid −NH2 amine −C≡N nitrile −NO2 nitro >C=O ketone
Figure 1: The same alkyl skeleton R gives rise to eight major families of organic compounds, one for each functional group G attached to it. Halide () and nitro () have no suffix and are never the principal group.

NCERT's definition (8.4.1). A functional group is an atom or a group of atoms joined to the carbon chain that is responsible for the characteristic chemical properties of the compound. NCERT's examples are the hydroxyl (OH), aldehyde (CHO) and carboxylic acid (COOH) groups. NCERT adds in 8.5.3 that the group is usually where the molecule reacts, so compounds with the same functional group react in the same way: , and all give hydrogen gas with sodium metal. Sorting compounds by functional group puts them into families (homologous series).

NCERT Table 8.4 gives one example for each class (the ending is the IUPAC suffix; "only" marks a group that is always a prefix):

Class: group, endingNCERT example
Alkane: no group, -aneButane,
Alkene: C=C, -eneBut-1-ene,
Alkyne: C≡C, -yneBut-1-yne,
Arene: no groupBenzene,
Halide: X, halo- only1-Bromobutane,
Alcohol: OH, -olButan-2-ol,
Aldehyde: CHO, -alButanal,
Ketone: C=O, -oneButan-2-one,
Nitrile: C≡N, -nitrilePentanenitrile,
Ether: O, alkoxy- onlyEthoxyethane,
Carboxylic acid: COOH, -oic acidButanoic acid,
Carboxylate ion: COO, -oateSodium butanoate,
Ester: COOR, -oateMethyl propanoate,
Acyl halide: COX, -oyl halideButanoyl chloride,
Amine: NH, NH, N, -amineButan-2-amine,
Amide: CONH, CONHR, CONR, -amideButanamide,
Nitro: NO, nitro- only1-Nitrobutane,
Sulphonic acid: SOH, sulphonic acidMethylsulphonic acid, (IUPAC name: methanesulfonic acid)
Key idea
Find the functional group first. It names the family, gives the ending (or only a prefix), and decides which chain is the parent and where the numbering starts.

2. Alkyl Halides

General formula: or , where X is F, Cl, Br or I. The halogen is a substituent: it is always named as a prefix (fluoro, chloro, bromo, iodo) and never takes a suffix.

  1. Pick the longest continuous chain. The halogen is only a prefix, so the chain need not contain the C bearing it: is 3-(chloromethyl)hexane.
  2. Number the chain so that the locants of all the prefixes taken together (halogens and alkyl groups) are lowest; the halogen alone does not decide: 5-chloro-2,3-dimethylheptane, not 3-chloro-5,6-dimethylheptane.
  3. Prefix with locant + halogen name + parent alkane.
Solved Example 1
Name .
2-bromobutane structure with chain numbering The four-carbon chain of 2-bromobutane, CH3-CH2-CH(Br)-CH3, numbered C1 to C4 from the end nearer the bromine, so the carbon carrying Br is C2. An arrow above shows the numbering direction. H3C CH2 CH CH3 Br C4 C3 C2 C1 number from the end nearer Br
Figure 2: 2-bromobutane. Br gets locant 2 because numbering starts from the closer end of the chain.
Solution

Four carbon chain, Br on C2 (numbering from the closer end). Assembled name: 2-bromobutane.

3. Alcohols

General formula: . The IUPAC family name is alkanol. Rules:

  1. Pick the longest continuous chain that contains the C bearing OH.
  2. Number from the end nearer OH so it gets the lowest locant.
  3. Number the positions of other substituents and list them as prefixes.
  4. Change ane to ol (drop-e rule: the of the alkane drops before the vowel ).

3.1 Classification: 1°, 2° and 3° alcohols

Alcohols are classified by the carbon that carries the OH group. If that carbon is a 1° carbon, the alcohol is a primary alcohol. Similarly for 2° (secondary) and 3° (tertiary) alcohols.

Classification of alcohols: primary, secondary, tertiary Three alcohols, one above the other, the carbon carrying OH circled. Primary, propan-1-ol, CH3-CH2-CH2-OH: that carbon has one carbon neighbour. Secondary, propan-2-ol, CH3-CH(OH)-CH3: two carbon neighbours. Tertiary, 2-methylpropan-2-ol, (CH3)3C-OH: three carbon neighbours. H3C CH2 CH2 OH H3C CH CH3 OH H3C C CH3 OH CH3 Primary (1°): propan-1-ol C-OH has 1 C neighbour Secondary (2°): propan-2-ol C-OH has 2 C neighbours Tertiary (3°): 2-methylpropan-2-ol C-OH has 3 C neighbours
Figure 3: Primary (propan-1-ol), secondary (propan-2-ol) and tertiary (2-methylpropan-2-ol) alcohols, classified by the carbon bearing (highlighted).
Similar common names, different classifications. Isopropyl alcohol is a secondary alcohol, but isobutyl alcohol is a primary alcohol. Common names like "isopropyl" and "isobutyl" describe the alkyl group shape, not where the OH sits.

3.2 Polyhydric alcohols (diols and triols)

Compounds with two OH groups are diols (1,2-diols are also called glycols), and those with three are triols. Each hydroxyl gets a locant and the suffix becomes diol or triol; the of the alkane stays, since d and t are consonants. Examples: ethane-1,2-diol (ethylene glycol, ), a diol, and propane-1,2,3-triol (glycerol, ), a triol, not a glycol.

Polyhydric alcohols: ethylene glycol and glycerol Top, ethane-1,2-diol (ethylene glycol), HO-CH2-CH2-OH, with C1 and C2 marked: two hydroxyl groups on adjacent carbons. Bottom, propane-1,2,3-triol (glycerol), HO-CH2-CH(OH)-CH2-OH, with C1, C2 and C3 marked: one hydroxyl on each carbon of a three-carbon chain. HO CH2 CH2 OH HO CH2 CH CH2 OH OH C1 C2 Ethane-1,2-diol (ethylene glycol) C1 C2 C3 Propane-1,2,3-triol (glycerol)
Figure 4: Ethylene glycol (a diol) and glycerol (a triol). Locants are needed for each group.
Stability note: Two or three OH groups on the same carbon (a "gem-diol" or "gem-triol") are usually unstable: the compound loses water to give an aldehyde or ketone (from a gem-diol) or a carboxylic acid (from a gem-triol). A few gem-diols are stable, for example chloral hydrate, .
Solved Example 2
Name .
Butan-2-ol structure with numbering Condensed structure of butan-2-ol: CH3, CH, CH2, CH3 in a zigzag, numbered C1 to C4 from the left. The OH group sits on C2, which is circled. CH3 CH CH2 CH3 OH C1 C2 C3 C4
Solution

Four carbon chain, OH on C2 (numbering from the closer end). Parent: butane butan-2-ol. Assembled: butan-2-ol. This is a 2° alcohol.

4. Ethers

Ethers are compounds where two carbon atoms bond to the same oxygen: . IUPAC names them as alkoxyalkane. Rules:

  1. Identify the larger alkyl side: it becomes the parent alkane.
  2. The smaller side (including the oxygen) becomes the alkoxy prefix: = methoxy, = ethoxy, and so on.
  3. Number the parent chain so the alkoxy group gets the lowest locant.
Solved Example 3
Name .
2-methoxypropane: parent chain and prefix Condensed structure of 2-methoxypropane: a three-carbon chain CH3, CH, CH3, numbered C1 to C3, with an OCH3 group on the circled C2. The OCH3 is labelled methoxy (prefix); a bracket under the chain is labelled propane (parent, C1 to C3). CH3 CH CH3 OCH3 methoxy (prefix) C1 C2 C3 propane (parent, C1–C3)
Solution

Larger alkyl: propyl (from the isopropyl side). Smaller side with oxygen: methoxy. So parent is propane; the methoxy sits on C2 (the isopropyl branching carbon). Assembled: 2-methoxypropane.

NCERT's examples: is ethoxyethane (Table 8.4), and , whose common name is ethyl methyl ether (Table 8.1), is methoxyethane.

5. Aldehydes

General formula: . As the principal group on a chain, the CHO carbon must be at the end of the parent chain, and it is always numbered C1 (a CHO on a ring: last point below). Family name: alkanal.

  • Longest chain includes the CHO carbon.
  • Change ane to al (drop the ).
  • No locant is needed for the CHO itself; it is always at C1.
  • Two CHO groups on the same chain (one at each end) suffix -dial.
  • When CHO is attached to a ring, use carbaldehyde: cyclohexanecarbaldehyde has the CHO hanging off the ring.
Aldehyde and ketone functional groups compared Left, ethanal (an aldehyde), CH3-CHO: the carbonyl carbon at the end of the chain, with an H on it; the CHO group is boxed; suffix -al. Right, propanone (a ketone), CH3-CO-CH3: the carbonyl carbon between two other carbons; the C=O is boxed; suffix -one. H3C C H O H3C C CH3 O Ethanal (aldehyde) −CHO at chain end suffix: -al Propanone (ketone) >C=O between two Cs suffix: -one
Figure 5: Aldehyde (ethanal, ) has at the chain end. Ketone (propanone, ) has inside the chain.
Solved Example 4
Name .
Butanal structure with C1–C4 numbering Condensed structure of butanal: CH3, CH2, CH2 and the aldehyde carbon C, which carries a double bond to O and an H. The C=O of the aldehyde group is boxed. Numbering runs C1 at the aldehyde carbon to C4 at the CH3. CH3 CH2 CH2 C H O C4 C3 C2 C1
Solution

Four carbon chain including the CHO C (which is C1). Parent: butane butanal.

Exam Trick

Ends need no number. Six groups always put their own carbon at the end of the chain, where it is C1: CHO, COOH, COOR (ester), CN, CONH and COX. Their suffix never carries a locant: butanal, butanoic acid, methyl propanoate, pentanenitrile. OH, C=O and NH sit on a carbon of the chain, so they take a locant, even at the chain end: propan-1-ol, butan-2-ol, butan-2-one, butan-2-amine. IUPAC 2013 drops it only in one- and two-carbon names such as methanamine and ethanol, and writes propan-2-one; NCERT writes propanone.

6. Ketones

General structure: . The carbonyl carbon sits inside the chain (not at an end). Family name: alkanone.

  • Longest chain includes the C=O carbon.
  • Number from the end that gives the C=O the lowest locant.
  • Change ane to one and add the locant just before one.
  • Common naming: name the two alkyl groups on either side of C=O and add "ketone", e.g. ethyl methyl ketone for butan-2-one (the two groups in alphabetical order).
Solved Example 5
Name .
Butan-2-one structure with numbering Condensed structure of butan-2-one: CH3, C, CH2, CH3 in a zigzag, numbered C1 to C4. C2 carries a double bond to O; the C=O group is boxed. CH3 C CH2 CH3 O C1 C2 C3 C4
Solution

Four carbon chain with the C=O carbon inside it. Numbering from the end nearer the C=O makes the carbonyl carbon C2 (from the other end it would be C3). Assembled: butan-2-one. Common name: ethyl methyl ketone.

Aldehyde, -alThe carbonyl carbon carries an H.
Always a chain end, so it is C1.
No locant: butanal.
Ketone, -oneThe carbonyl carbon carries two carbons.
Always inside the chain.
Takes a locant: butan-2-one, pentan-3-one (NCERT writes propanone).

7. Carboxylic Acids

General formula: . Family name: alkanoic acid. On a chain, the COOH carbon is at the end of the chain and is always C1 (for three or more COOH groups on one chain, see Solved Example 6).

  • Longest chain includes the COOH carbon.
  • Change ane to oic acid (drop-e).
  • No locant for COOH; it is C1.
  • Two COOH groups on the same chain suffix -dioic acid (e.g. hexanedioic acid).
  • When COOH is attached to a ring, use carboxylic acid: cyclohexanecarboxylic acid.
Ethanoic acid and ethanedioic acid Top, ethanoic acid, CH3-COOH: one carboxyl group (boxed) at the end of the chain; monocarboxylic, suffix -oic acid. Bottom, ethanedioic acid (oxalic acid), HOOC-COOH: a carboxyl group at each end; dicarboxylic, suffix -dioic acid. H3C C OH O HO C C OH O O Ethanoic acid (monocarboxylic → -oic acid) Ethanedioic acid (dicarboxylic → -dioic acid; oxalic acid)
Figure 6: A monocarboxylic acid (ethanoic acid) and a dicarboxylic acid (ethanedioic acid, oxalic acid). Two COOH groups on the parent chain change the suffix to dioic acid.
Solved Example 6
Give the IUPAC name of citric acid, .
Citric acid structure Condensed structure of citric acid: HOOC, CH2, C, CH2, COOH in a row; the central C, circled, also carries OH above and COOH below. The three chain carbons are numbered C1, C2 and C3. HOOC CH2 C CH2 COOH OH COOH C1 C2 C3
Solution

Three COOH groups cannot all be ends of one chain, so the oic acid ending (which makes each COOH carbon a chain end) cannot name them all. For three or more COOH groups on a chain, IUPAC names every one with the suffix carboxylic acid, which leaves the COOH carbons out of the parent chain. The parent is then the three carbons that carry them, propane: one COOH on each end carbon and one on the central C, which also carries the OH. Assembled: 2-hydroxypropane-1,2,3-tricarboxylic acid.

Exam Trick

"carb" means the carbon is extra. When the group's carbon cannot be part of the parent, the suffix names that carbon itself: -carbaldehyde (CHO), -carboxylic acid (COOH), -carbonitrile (CN). So cyclohexanecarboxylic acid has seven carbons (six in the ring and the COOH carbon), and citric acid is a propane-tricarboxylic acid. NCERT Class 12 names the benzene compounds benzenecarbaldehyde and benzenecarboxylic acid, and accepts benzaldehyde and benzoic acid.

Quick Recall: tap to check
Why is there no number in butanal or butanoic acid?
The CHO or COOH carbon can only be a chain end, so it is always C1 and the 1 is left out.
Name .
Pentan-2-one: number from the end nearer the C=O.
Which ending does a ring carrying CHO take?
-carbaldehyde, as in cyclohexanecarbaldehyde: the CHO carbon is not a ring carbon.
Name .
Hexanedioic acid (adipic acid): a COOH at each end gives -dioic acid, and the e of hexane stays before the consonant d.

8. Carboxylic Acid Derivatives (the Acyl Family)

Removing the OH from a carboxylic acid leaves an acyl group, . The acyl name is formed by changing the ic acid ending of the parent acid to yl: acetyl (from acetic), ethanoyl (from ethanoic), etc. Different X groups attached to the acyl C give a whole family of derivatives.

Carboxylic acid derivatives family The acyl core R-CO-X: R bonded to a carbonyl carbon that carries X. Changing X changes the family: X = OH, carboxylic acid; X = Cl, acid chloride; X = OCOR prime, acid anhydride; X = OR prime, ester; X = NH2, amide; X = O minus, carboxylate salt. R C X O Acyl core: R-CO-X Change X → change family X = OH → Carboxylic acid X = Cl → Acid chloride X = OCOR′ → Acid anhydride X = OR′ → Ester X = NH2 → Amide X = O− → Carboxylate salt
Figure 7: Carboxylic acid derivatives all share the acyl core. Swapping X on the acyl carbon changes the family.
Gallery of acyl derivatives: acid chloride, anhydride, ester, amide Four ethanoic acid derivatives, one above the other: ethanoyl chloride, CH3-CO-Cl (an acid chloride, X = Cl); ethanoic anhydride, CH3-CO-O-CO-CH3 (two acyl groups share one O); ethyl ethanoate, CH3-CO-O-CH2-CH3 (an ester, X = OR prime); ethanamide, CH3-CO-NH2 (an amide, X = NH2). H3C C Cl O H3C C O C CH3 O O H3C C O CH2 CH3 O H3C C NH2 O Ethanoyl chloride (acid chloride, X = Cl) Ethanoic anhydride (two acyls share one O) Ethyl ethanoate (ester, X = OR′) Ethanamide (amide, X = NH2)
Figure 8: Four common derivatives of ethanoic acid obtained by replacing the –OH group of the carboxyl group

8.1 Acid Halides (COX)

IUPAC name: alkanoyl halide. Change oic acid to oyl and add the halide as a separate word.

Example: is ethanoyl chloride (common: acetyl chloride).

8.2 Acid Anhydrides

Two acyl groups sharing one oxygen: . IUPAC name: alkanoic anhydride. Replace "acid" with "anhydride" in the parent acid name.

Example: is ethanoic anhydride. When the two acyl groups are different, name both: butanoic ethanoic anhydride.

8.3 Esters (COOR')

General formula: . IUPAC name: alkyl alkanoate.

  • The alkyl name (from R') comes first as a separate word.
  • The acid part becomes oate (drop the "ic acid" ending).

Example: is ethyl ethanoate (common: ethyl acetate).

NCERT's ester example is methyl propanoate, . Salts of carboxylic acids are named the same way: the metal first, then the -oate name of the anion. is sodium butanoate (NCERT Table 8.4).

Ester, Two words: alkyl alkanoate.
The alkyl on the O comes first.
: ethyl ethanoate.
Ether, One word: alkoxyalkane.
The smaller side with the O is the prefix.
: methoxyethane.

8.4 Amides (CONH)

IUPAC name: alkanamide. Change oic acid to amide (drop "acid").

  • Example: is ethanamide.
  • N-alkyl substitution: if the N carries alkyl groups, prefix the substituent with capital : N-methylethanamide, N,N-diethylethanamide.
  • Aromatic N substitution (a phenyl on N): name the phenyl with the locant N, as for any group on N. So is N-phenylethanamide (common name: acetanilide).
N-methylethanamide showing the N locant Condensed structure of N-methylethanamide: CH3, C, N, CH3 in a row. The carbon carries a double bond to O; the circled N carries an H and the second CH3. Labels: N-methylethanamide; CH3 on N, not on chain carbon. CH3 C N CH3 O H N-methylethanamide CH3 on N, not on chain carbon

8.5 Imides

Some dicarboxylic acids form cyclic amides where both acyl groups bond to the same nitrogen. The suffix -imide is used. Example: succinimide, the cyclic imide of succinic acid (butanedioic acid); its IUPAC name is pyrrolidine-2,5-dione (beyond NCERT).

Key idea
Every acid derivative is an acyl group plus X, and its name changes only the ending of the acid: -oyl halide, alkyl -oate, -amide, -oic anhydride. The acyl carbon stays C1.

9. Amines

General formula: (primary). IUPAC name: alkanamine or the group appears as an amino- prefix in more complex compounds.

9.1 Classification: 1°, 2°, 3°, quaternary

Amines are classified by the number of carbon groups (alkyl or aryl) on the nitrogen, i.e. how many hydrogens of have been replaced by a carbon group. So aniline, , with one phenyl on N, is a primary amine.

Classification of amines Increasing substitution on nitrogen, the H atoms of NH3 replaced by R, from top to bottom: R-NH2, primary, one R group on N, for example CH3NH2; R2NH, secondary, two R groups, for example (CH3)2NH; R3N, tertiary, three R groups, for example (CH3)3N; R4N plus X minus, a quaternary ammonium salt, four R groups and an anion, for example (CH3)4N plus Cl minus. Increasing substitution on nitrogen (H atoms of NH3 replaced by R) R-NH2 Primary (1°) 1 R group on N e.g. CH3NH2 R2NH Secondary (2°) 2 R groups on N e.g. (CH3)2NH R3N Tertiary (3°) 3 R groups on N e.g. (CH3)3N R4N+ X− Quaternary salt 4 R groups + anion e.g. (CH3)4N+Cl−
Figure 9: Primary, secondary, tertiary amines and a quaternary ammonium salt, formed by progressive substitution of the H atoms of .

9.2 Simple amines

Name the alkyl group(s) on nitrogen, then add "amine": is methylamine; is dimethylamine. More complex amines use amine as a suffix on the parent chain, with the amino carbon getting the lowest locant: pentan-2-amine, for example.

Methylamine and dimethylamine are common names. In IUPAC names (NCERT Class 12, section 9.3 and Table 9.1) a primary amine is an alkanamine: is methanamine and is ethanamine. A secondary or tertiary amine takes the longest group as the parent and the locant N for the others: is N-methylmethanamine, is N-methylethanamine and is N,N-dimethylmethanamine. With two NH groups the e of the alkane stays: is ethane-1,2-diamine. NCERT Table 8.4's example is butan-2-amine.

9.3 Aromatic amines

Aromatic amines have the nitrogen attached directly to a benzene ring. They are usually named as derivatives of the parent aniline (). Example: 2-chloroaniline, 4-methylaniline.

Aniline and substituted anilines Left, aniline (benzenamine, C6H5NH2): a benzene ring with an NH2 group. Right, 4-methylaniline (p-toluidine): the ring numbered 1 to 6 from the carbon carrying NH2, with CH3 on C4. NH2 NH2 CH3 Aniline (benzenamine, C6H5NH2) 1 2 3 4 5 6 4-methylaniline (p-toluidine)
Figure 10: Aniline (parent aromatic amine) and a substituted example, 4-methylaniline. Ring positions are numbered with carbon as C1.

9.4 Amine salts and quaternary ammonium salts

Replace amine with ammonium (or aniline with anilinium) and add the anion name: methylammonium chloride, tetramethylammonium bromide.

10. Nitro and Related Compounds

General formula (nitroalkane): . The NO group is always a substituent prefix: nitro-. Family: nitroalkane.

Solved Example 7
Name .
2-nitropropane structure Condensed structure of 2-nitropropane: CH3, CH, CH3 numbered C1 to C3, with an NO2 group on the circled C2. CH3 CH CH3 NO2 C1 C2 C3
Solution

Three carbon chain, NO on C2. Assembled name: 2-nitropropane.

10.1 Alkyl nitrites

These are the isomers of nitroalkanes with the oxygen inside: . They are esters of nitrous acid and are named like esters, alkyl nitrite; this is also the IUPAC name. Example: is ethyl nitrite.

Nitroethane and ethyl nitrite as constitutional isomers Top, nitroethane, CH3CH2-NO2: the nitrogen is bonded to carbon (a C-N bond). Bottom, ethyl nitrite, CH3CH2-O-N=O: an oxygen is bonded to carbon (C-O-N=O). Both are C2H5NO2: constitutional isomers, same formula, different connectivity. H3C CH2 NO2 H3C CH2 O N O C-N bond Nitroethane CH3CH2-NO2 (C2H5NO2) C-O-N=O Ethyl nitrite CH3CH2-O-N=O (C2H5NO2) Constitutional isomers: same C2H5NO2, different connectivity
Figure 11: Nitroethane and ethyl nitrite are constitutional isomers. Nitro has CN; nitrite has CON.

11. Alkyl Cyanides (Nitriles) and Isocyanides

11.1 Nitriles (CN)

General formula: . IUPAC name: alkanenitrile. The nitrile carbon is counted in the chain and becomes C1.

Example: is ethanenitrile (common name: acetonitrile). is 2-methylpropanenitrile.

NCERT's example is pentanenitrile, : the C≡N carbon is C1, so the chain has five carbons. When the CN carbon cannot be in the parent, it is named -carbonitrile (on a ring) or with the prefix cyano-.

11.2 Isocyanides (NC)

General formula: . IUPAC names them in two ways: alkyl isocyanide (functional-class name) or the prefix isocyano- on the alkane (substitutive name). Example: is methyl isocyanide or isocyanomethane (older name: methyl isonitrile).

Acetonitrile and methyl isocyanide as constitutional isomers Top, acetonitrile (ethanenitrile), CH3-C triple bond N with a lone pair on N: the carbon of the C triple bond N group is bonded to the alkyl. Bottom, methyl isocyanide (isocyanomethane), CH3-N triple bond C, with a plus charge on N and a minus charge and a lone pair on the end C: the nitrogen is bonded to the alkyl. Both are C2H3N: constitutional isomers with the atom connectivity swapped. H3C C N H3C N C C≡N Acetonitrile CH3-C≡N (ethanenitrile) C2H3N, C bonded to the alkyl + − N≡C Methyl isocyanide CH3-N≡C (isocyanomethane) C2H3N, N bonded to the alkyl Constitutional isomers: same C2H3N, atom connectivity swapped
Figure 12: Acetonitrile () and methyl isocyanide () are constitutional isomers: same formula, different atom that bonds to the alkyl.

12. Multi-Functional Compounds and Priority Order

When a molecule contains more than one functional group, IUPAC uses a fixed seniority list. The highest-priority group is treated as the principal functional group (secondary suffix in the name); every other group becomes a prefix, except a C=C or CC in the main chain, which stays in the name as ene or yne (but-3-en-2-ol).

IUPAC priority ladder for principal functional groups A vertical ladder of seniority, highest at the top: 1 carboxylic acid, -oic acid or carboxy-; 2 sulphonic acid, -sulphonic acid; 3 ester, alkyl -oate or alkoxycarbonyl-; 4 acid halide, -oyl halide; 5 amide, -amide or carbamoyl-; 6 nitrile, -nitrile or cyano-; 7 aldehyde, -al or formyl- or oxo-; 8 ketone, -one or oxo-; 9 alcohol, -ol or hydroxy-; 10 amine, -amine or amino-. An arrow down the side: decreasing priority. Below, the lowest: halide (halo-), nitro (nitro-) and alkoxy (alkoxy-) are always prefixes, never the principal suffix. Highest priority (principal suffix wins) 1 Carboxylic acid -oic acid / carboxy- 2 Sulphonic acid -sulphonic acid 3 Ester alkyl -oate / alkoxycarbonyl- 4 Acid halide -oyl halide 5 Amide -amide / carbamoyl- 6 Nitrile -nitrile / cyano- 7 Aldehyde -al / formyl- or oxo- 8 Ketone -one / oxo- 9 Alcohol -ol / hydroxy- 10 Amine -amine / amino- decreasing priority Lowest priority (becomes prefix if higher group present) Always prefix only, never principal suffix Halide (halo-), Nitro (nitro-), Alkoxy (alkoxy-)
Figure 13: IUPAC priority ladder. The highest-ranked group in the molecule becomes the suffix; every other group becomes a prefix, except a C=C or CC in the main chain (it stays in the name as ene or yne).
RankClassAs suffixAs prefix
1 (highest)Carboxylic acid-oic acidcarboxy-
2Sulphonic acid-sulphonic acidsulfo-
3Esteralkyl -oatealkoxycarbonyl-
4Acid halide-oyl halidehalocarbonyl- (e.g. chlorocarbonyl-)
5Amide-amidecarbamoyl-
6Nitrile-nitrilecyano-
7Aldehyde-aloxo- (C in the chain), formyl- (C outside the parent chain or ring)
8Ketone-oneoxo-
9Alcohol-olhydroxy-
10Amine-amineamino-
11C=C (double bond)-enenone: stays in the name
12CC (triple bond)-ynenone: stays in the name
always prefixHalide, Nitro, Alkoxynonehalo-, nitro-, alkoxy-
How to use the table. Find the highest-ranked group in your compound: it is the principal group and gives the family suffix. Choose the parent chain to contain it and number the chain so that it gets the lowest locant. If that still leaves a choice, the C=C or CC (which stay in the name as ene or yne) get the lowest locants next, and then the prefixes taken together. Every other group is named as a prefix from the "as prefix" column, and the prefixes are written in alphabetical order. For an aldehyde group as a prefix: is 4-oxobutanoic acid (the CHO carbon is C4 of the chain), while is 2-formylbutanoic acid (the CHO carbon is off the chain). Acid anhydrides are not in the NCERT list; IUPAC ranks them just below the acids (after SOH) and above esters.

NCERT's version (8.5.3). First find the functional group: it decides the suffix. The longest chain of carbon atoms that contains it is numbered so that the functional group gets the lowest possible number. In a compound with several groups, one is the principal functional group; the others, the subordinate groups, are named as prefixes. NCERT's order of decreasing priority: COOH, SOH, COOR, COCl, CONH, CN, CHO, C=O, OH, NH, C=C, C≡C. The groups R, , the halogens (F, Cl, Br, I), NO and alkoxy (OR) are always prefixes. So a compound with both an OH and a keto group is a hydroxyalkanone: NCERT's is 7-hydroxyheptan-2-one, not 2-oxoheptan-7-ol.

Exam Trick

A Nice Cat Ate Apples. Read the order in five blocks: Acid family (COOH, SOH, COOR, COX, CONH: the acid first, the amide last), Nitrile (CN), Carbonyls (CHO before C=O), Alcohol (OH), Amine (NH). After them come C=C and C≡C, which stay in the parent name.

JEE Advanced

The parent chain must hold as many principal groups as it can. Before it compares chain lengths, IUPAC first asks for the chain with the largest number of principal groups (the 2013 recommendations keep this rule first). In the longest chain through one COOH has seven carbons (from the first COOH carbon to the far ), but the four-carbon chain through both COOH carbons wins: the name is 2-butylbutanedioic acid, not 3-carboxyheptanoic acid. Only when the principal groups cannot all be chain ends, as with the three COOH of citric acid (Solved Example 6), does the name switch to -carboxylic acid. NCERT's rule asks only for the longest chain of carbon atoms that contains the functional group; this rule settles the cases it leaves open.

NCERT and IUPAC 2013. This note follows NCERT. Differences you may meet in other books: (1) IUPAC 2013 picks the longest chain before it looks for C=C or C≡C, while NCERT keeps them in the parent chain (the note on the introduction to nomenclature shows an example); the principal group is in the chain in both. In 2013, C=C and C≡C belong to the parent name and are not ranked against the groups. (2) IUPAC spells sulfonic acid and sulfo-, NCERT sulphonic and sulpho-. (3) IUPAC 2013 keeps some traditional names as preferred names. Acetic acid is one, so its derivatives are acetyl chloride, acetic anhydride, acetamide, ethyl acetate and acetonitrile, where this note uses NCERT's ethanoyl chloride, ethanoic anhydride, ethanamide, ethyl ethanoate and ethanenitrile. Aniline, benzaldehyde and benzoic acid are others (NCERT Class 12 also gives benzenamine, benzenecarbaldehyde and benzenecarboxylic acid). Acetone is written propan-2-one, where NCERT writes propanone. (4) For amine salts IUPAC 2013 prefers methanaminium chloride to methylammonium chloride (9.4).
Key idea
One kind of principal group per name: it is the suffix (with di- or tri- if it occurs more than once) and gets the lowest locant. C=C and C≡C stay in the parent as -ene and -yne; every other group is a prefix, written A to Z.
Naming a multi-functional compound by priority HO-CH2-CH2-COOH with the OH circled and the COOH boxed, the chain numbered C1 at the COOH carbon, then C2 and C3. A box below: compare COOH with OH; COOH ranks higher, so it becomes the suffix (-oic acid) and OH the prefix (hydroxy-); parent propanoic acid; the OH is at 3: 3-hydroxypropanoic acid. HO CH2 CH2 C O OH −OH −COOH C3 C2 C1 Priority check Compare: −COOH vs −OH −COOH > −OH −COOH → suffix (-oic acid) −OH → prefix (hydroxy-) Parent: propanoic acid Locant of −OH: 3 3-hydroxypropanoic acid
Figure 14: Naming . COOH wins priority: parent is propanoic acid; OH becomes a 3-hydroxy prefix.
Solved Example 8
Name .
Solution

The compound has both OH and COOH. Priority: COOH beats OH. So COOH becomes the suffix (oic acid) and OH becomes a prefix (hydroxy-). Longest chain: 3 carbons including COOH (C1). OH sits on C3. Assembled name: 3-hydroxypropanoic acid. See Figure 14 above for the priority breakdown.

Solved Example 9
Name .
4-hydroxybutan-2-one structure with numbering and priority Condensed structure of 4-hydroxybutan-2-one: CH3, C, CH2, CH2 numbered C1 to C4, with a double bond from C2 to O and an OH on C4. The C=O is boxed in red and labelled ketone (wins, becomes the suffix); the OH is circled and labelled hydroxy (loses, becomes a prefix). CH3 C CH2 CH2 OH O C1 C2 C3 C4 ketone (wins → suffix) hydroxy (loses → prefix)
Solution

Ketone (C=O) vs alcohol (OH): ketone wins. Suffix: one. OH becomes a prefix (hydroxy-). Longest chain: 4 carbons. Number from the C=O end so it gets the lowest locant: C1 = CH, C2 = C=O, C3 = CH, C4 = CHOH. Assembled: 4-hydroxybutan-2-one.

Every name in this note comes from the same few decisions, in this order:

Flowchart: naming a compound with functional groups Flowchart. Start with the compound and list every group; alkyl, phenyl, halo, nitro and alkoxy groups are only prefixes. Is there any group that takes a suffix? If not, name it as a substituted hydrocarbon. If yes, the principal group is the highest in the order carboxylic acid, sulphonic acid, ester, acid halide, amide, nitrile, aldehyde, ketone, alcohol, amine. The parent is the longest chain that holds as many of these groups as possible; in NCERT it also holds the double or triple bond. Is the principal group CHO, COOH, COOR, CN, CONH2 or COX, whose own carbon is always the chain end? If yes, that carbon is C1 and needs no locant, as in butanal. If not (OH, C=O, NH2), its locant is written. Then number: the principal group gets the lowest locant, then the double or triple bond, then all prefixes. Write the prefixes in alphabetical order, then the parent with ene or yne, then the suffix. no yes yes no Start: the compound List every group. R, C6H5−, halo, nitro and alkoxy are only prefixes Any group with a suffix? Name it as a substituted hydrocarbon Principal group = the highest: COOH > SO3H > COOR > COX > CONH2 > CN > CHO > C=O > OH > NH2 Parent: the longest chain that holds as many of them as possible; in NCERT it also holds the C=C or C≡C CHO, COOH, COOR, CN, CONH2 or COX? Its carbon is C1: no locant (butanal) Number: principal group lowest, then C=C or C≡C, then all prefixes Write: prefixes A to Z + parent (-ene, -yne) + suffix
Figure 15: Naming any compound in this note: find the principal group first; it fixes the suffix, the parent chain and the numbering, and every other group becomes a prefix.

The whole concept on one page:

Mind map of functional group nomenclature Mind map with naming functional groups at the top and six branches: the functional group (the atom or group that sets the reactions; compounds with the same group react alike; NCERT's examples hydroxyl, aldehyde and carboxylic acid groups); suffix families (ol, al, one, oic acid, nitrile, amine, amide); prefix-only groups (halo, nitro, alkoxy, alkyl, phenyl); the acid family (ester as alkyl alkanoate, acid halide as alkanoyl halide, anhydride as alkanoic anhydride); the priority order, ranks 1 to 5 carboxylic acid, sulphonic acid, ester, acid halide, amide and ranks 6 to 10 nitrile, aldehyde, ketone, alcohol, amine, with the other groups as prefixes in alphabetical order, except a double or triple bond, which stays in the parent; and numbering (principal group lowest, the CHO, COOH or CN carbon is carbon 1, then double or triple bonds, then prefixes). Naming functional groups Functional group Atom or group that sets the reactions Same group, same reactions (NCERT) NCERT examples: −OH, −CHO, −COOH Suffix families −OH: -ol; −CHO: -al; >C=O: -one −COOH: -oic acid; −CN: -nitrile −NH2: -amine; −CONH2: -amide Prefix only Halo-, nitro-, alkoxy- (ethers) Alkyl (R) and phenyl (C6H5−) Acid family Ester: alkyl alkanoate (2 words) Acid halide: alkanoyl halide Anhydride: alkanoic anhydride Priority (suffix) 1-5: COOH, SO3H, COOR, COX, CONH2 6-10: CN, CHO, C=O, OH, NH2 Others: prefixes A to Z (not C=C, C≡C) Numbering Principal group gets the lowest locant CHO, COOH, CN carbon is C1 Then C=C/C≡C, then the prefixes
Figure 16: Mind map of functional-group nomenclature: what a functional group is, the suffix and prefix-only groups, the acid family, the priority order and the numbering rules.
Solved Example 10
The IUPAC name of is
(A) but-3-enal
(B) but-1-en-4-al
(C) 4-oxobut-1-ene
(D) but-2-enal
Solution:

Answer: (A). CHO is the only group that can be a suffix, so it is the principal group (-al) and its carbon is C1. Counting from it, the C=C starts at C3: but-3-enal. (B) numbers from the wrong end, and a -al ending never takes a number. (C) turns the principal group into a prefix. (D) is a different compound, .

Solved Example 11
is named
(A) 4-hydroxypentanal
(B) 2-hydroxypentan-5-al
(C) 5-oxopentan-2-ol
(D) 1-oxopentan-4-ol
Solution:

Answer: (A). The aldehyde outranks the alcohol, so the suffix is -al and the CHO carbon is C1. The five-carbon chain then carries the OH on C4, named as the prefix hydroxy-: 4-hydroxypentanal. (B) numbers from the wrong end; (C) and (D) make the alcohol the suffix, which breaks the priority order.

Solved Example 12
Name (i) and (ii) . (NCERT Problem 8.8 ii and iii)
Solution:

(i) Two keto groups: the suffix becomes -dione, and the e of hexane stays before the consonant d. The six-carbon chain is numbered from the end that gives the C=O carbons 2 and 4 (from the other end they would be 3 and 5): hexane-2,4-dione.

(ii) A ketone and a carboxylic acid: COOH wins, so the suffix is -oic acid and the COOH carbon is C1. The keto group on C5 becomes the prefix oxo-: 5-oxohexanoic acid.

Solved Example 13
Name (i) and (ii) .
Solution:

(i) The alcohol outranks the amine: the suffix is -ol on C1 and the NH is the prefix amino- on C2: 2-aminoethan-1-ol (often written 2-aminoethanol).

(ii) An ester: the alkyl on the O, methyl, comes first as a separate word; the acid part has three carbons, propanoic acid, which becomes propanoate: methyl propanoate (NCERT Table 8.4).

Quick Recall: tap to check
OH or C=O: which one becomes the suffix?
C=O (ketone, -one). The OH becomes hydroxy-, as in 4-hydroxybutan-2-one.
Which groups are never the suffix (NCERT)?
R, , the halogens, NO and alkoxy (OR): they are always prefixes.
When is CHO written oxo- and when formyl-?
oxo- when its carbon is part of the parent chain (4-oxobutanoic acid); formyl- when it is not (2-formylbutanoic acid).
What is the IUPAC name of ?
Methanamine (NCERT Class 12). Methylamine is its common name.
Practice Questions
  1. Give the IUPAC name of . (NCERT Exercise 8.4 b; NCERT draws it as a bond-line structure.)Answer: 3-Methylpentanenitrile: the CN carbon is C1, the chain runs C1 to C5 to the far , and the methyl sits on C3.
  2. Draw cyclohex-2-en-1-ol. (NCERT Problem 8.9 iv)Answer: A six-membered ring: the carbon carrying OH is C1, and the C=C joins C2 and C3. The OH is the suffix group, so it gets locant 1 before the double bond (NCERT).
  3. Give the condensed and bond-line formulas and name the functional groups of (b) 2-hydroxy-1,2,3-propanetricarboxylic acid and (c) hexanedial. (NCERT Exercise 8.7 b, c)Answer: (b) , citric acid (Solved Example 6): three carboxylic acid groups and one hydroxyl group. Bond-line: a five-carbon zigzag whose two end carbons are drawn with =O and OH, and whose middle carbon carries OH and a third COOH. (c) : an aldehyde group at each end of the six-carbon chain. Bond-line: a six-carbon zigzag with =O (and the H of CHO) drawn on both end carbons.
  4. Identify the functional groups: (a) a benzene ring with CHO on C1, OCH on C3 and OH on C4; (b) a benzene ring with NH and, opposite it, COOCHCHN(CH); (c) . (NCERT Exercise 8.8)Answer: (a) Aldehyde, methoxy (an ether) and hydroxyl (a phenol). (b) Amino (a primary aromatic amine), ester and a tertiary amino group. (c) A C=C double bond and a nitro group, besides the benzene ring.
  5. Write the first five members, with names, of the homologous series that begin with (a) , (b) and (c) . (NCERT Exercise 8.6)Answer: (a) Methanoic acid , ethanoic acid , propanoic acid , butanoic acid , pentanoic acid . (b) Propanone , butan-2-one , pentan-2-one , hexan-2-one , heptan-2-one . (c) Ethene , propene , but-1-ene , pent-1-ene , hex-1-ene . Each member adds one .
  6. Name .Answer: 3-Cyanopropanoic acid: COOH outranks CN, so the CN becomes the prefix cyano- and its carbon is not counted; the chain is the three carbons from the COOH carbon (C1).
  7. Name and .Answer: 3-Chlorobutanal (chloro is only a prefix; the CHO carbon is C1). Ethyl 3-oxobutanoate: the ester outranks the ketone, so the keto group becomes oxo- on C3 of the butanoate chain.

Common Mistakes to Avoid

Watch out
  • Treating the aldehyde or acid carbon as a substituent. When CHO or COOH is the principal group on a chain (suffix al or oic acid), its carbon is part of the parent chain and is numbered C1. Do not leave it out of the count. The carbon is left out only when the name says so: the prefixes formyl- and carboxy-, and the suffixes carbaldehyde and carboxylic acid (rings, and three or more COOH on a chain).
  • Using one for an aldehyde or al for a ketone. al ends the aldehyde (terminal), one names the ketone (internal). The difference is whether the carbonyl C has an H on it (aldehyde) or two carbons (ketone).
  • Wrong parent choice in an ether. The larger alkyl side is the parent; the smaller side is the alkoxy prefix. Reversing them gives an incorrect name.
  • Reading an alcohol's degree from "iso" in its name. The prefix iso- describes the alkyl skeleton, not the degree: isopropyl alcohol is 2° but isobutyl alcohol is 1°. The prefixes sec- and tert- do give it: sec-butyl alcohol is 2° and tert-butyl alcohol is 3°. When in doubt, look at the C bearing the OH and count its carbon neighbours.
  • Using acetic acid vs ethanoic acid inconsistently in the same name. Common names and IUPAC names should not be mixed within a single compound name.
  • Wrong priority ranking. Carboxylic acid outranks sulphonic acid, sulphonic acid outranks ester, ester outranks acid halide, acid halide outranks amide, amide outranks nitrile, nitrile outranks aldehyde, aldehyde outranks ketone, ketone outranks alcohol, alcohol outranks amine, and amine outranks C=C, then CC. Halide, nitro and alkoxy are always prefixes.
  • Skipping N locant for substituted amides / amines. If an alkyl group is on the nitrogen, you must use the capital italic locant (e.g. N-methyl). Missing this is a common mistake.
  • Leaving the nitrile carbon out of the chain. In a nitrile the carbon of C≡N is C1 of the parent: is propanenitrile (three carbons), not ethanenitrile. Only the prefix cyano- and the suffix -carbonitrile leave that carbon out.

Frequently Asked Questions

Q1. What is a functional group in one sentence?

A functional group is the specific atom or set of atoms attached to the hydrocarbon skeleton that determines both the chemical family of the compound and how it reacts. Common examples are OH (alcohol), CHO (aldehyde), COOH (carboxylic acid) and NH (amine).

Q2. Why is CHO always at C1 in an aldehyde name?

When CHO is the principal group on a chain, its carbon carries a hydrogen and at most one other carbon, so it can only be a chain end. Numbering starts there and the locant is always 1, so no number is written before "al". This is a rule for the suffix al only: on a ring the group is named carbaldehyde (its carbon is not a ring carbon), and as the prefix formyl- its carbon is outside the parent chain (as the prefix oxo-, a chain-end CHO stays in the chain but is not C1, as in 4-oxobutanoic acid).

Q3. What is the difference between an aldehyde and a ketone?

Both contain the carbonyl group C=O, but in an aldehyde the carbonyl carbon has at least one hydrogen and sits at the end of the chain (suffix al). In a ketone the carbonyl carbon has two other carbons attached and sits inside the chain (suffix one).

Q4. How do I name an ether?

Ethers are named as alkoxyalkanes. The larger alkyl side is the parent (alkane); the smaller side plus the oxygen becomes the alkoxy prefix. is methoxyethane; is 2-methoxypropane.

Q5. What is an acyl group?

An acyl group is what remains after you remove the OH from a carboxylic acid: . The whole family of carboxylic acid derivatives (acid halides, anhydrides, esters, amides) is built by attaching different groups to the acyl carbon. Naming: change the ic acid of the parent acid to yl (acetic acetyl, ethanoic ethanoyl).

Q6. How do I decide which functional group is the principal group when more than one is present?

Use the seniority order (NCERT 8.5.3). From highest to lowest: carboxylic acid, sulphonic acid, ester, acid halide, amide, nitrile, aldehyde, ketone, alcohol, amine, then C=C and CC. Acid anhydrides are not in the NCERT list; IUPAC ranks them between sulphonic acid and ester. The highest-ranking group becomes the secondary suffix and the other groups become prefixes, except a C=C or CC in the main chain, which stays in the name as ene or yne. Halide, nitro and alkoxy are always named as prefixes.

Q7. What is the difference between a primary, secondary and tertiary amine?

The classification counts how many carbon groups (alkyl or aryl) are attached to nitrogen: primary (one), secondary (two), tertiary (three). Aniline, with one phenyl on N, is primary. Adding a fourth carbon group gives a quaternary ammonium salt with a positive charge on N and a counter-anion. Note this is different from alcohols, where the classification is based on the carbon bearing OH, not on the substitution around O.

Q8. What does the "N" prefix mean in a name like N-methylethanamide?

The italic capital is a locant that tells you the methyl substituent is attached to the nitrogen atom of the amide (not to a carbon of the chain). Similarly N,N-dimethyl means two methyl groups on N; N-ethyl-N-methyl means one of each. This convention is essential for amides and amines because otherwise the position of the alkyl group would be ambiguous.

Q9. Why do carboxylic acids beat ketones and alcohols in the priority order?

The order is a convention fixed by IUPAC so that every compound gets one name; it is learnt, not worked out. Oxidation state is at most a rough guide: the acid carbon (+3) does sit above the ketone carbon (+2) and the alcohol carbon (2 in methanol, 1 to +1 in other alcohols), but the aldehyde carbon (+1) outranks the ketone carbon (+2), and the acid, ester, acid halide, amide and nitrile carbons are all +3 yet are ranked apart. So learn the order itself.

Keep going

Past questions on this · 1

JEE Main 2025 Apr 3 Shift 2Chemistry Q19
All concepts in Some Basic Principles of Organic Chemistry →