A current loop in a uniform magnetic field experiences zero net force but a non-zero torque that tries to align its magnetic moment with the field. For a loop of N turns, area A, carrying current I, the magnetic dipole moment is M=NIA, and the torque is τ=M×B, magnitude τ=MBsinθ. The potential energy is U=−M⋅B, and the work done in rotating the dipole from angle θ1 to θ2 is W=MB(cosθ1−cosθ2). These formulas are directly examined in JEE Main and NEET, and they are the working principle behind the moving coil galvanometer, electric motors, and the concept of magnetic dipoles in matter.
On this page1Dipole moment2Torque on a loop3Energy and work4Non-uniform field
Key Formulas - Quick Reference
★ Must learnMagnetic dipole moment of N-turn loop: M=NIA, where A is normal to the loop (right-hand curl from I)
★ Must learnTorque on loop in uniform B: τ=M×B, magnitude τ=MBsinθ=NIABsinθ
Maximum torque (θ=90°): τmax=MB=NIAB
Zero torque (θ=0° or 180°): loop is stable (θ=0) or unstable (θ=180°)
★ Must learnPotential energy: U=−M⋅B=−MBcosθ
★ Must learnWork done rotating from θ1 to θ2: W=MB(cosθ1−cosθ2)
Angular frequency of small oscillations about stable equilibrium: ω=MB/IinertiaJEE Advanced
Net force on a loop in uniformB: zero. In non-uniform B: F=∇(M⋅B). Beyond syllabus
1. Magnetic Dipole Moment
A closed current loop of area A carrying current I has a magnetic dipole moment:
M=IA(single turn)
M=NIA(N turns)
Here A is a vector normal to the loop's plane; its direction is fixed by the right-hand curl rule: curl fingers along I, thumb points along A (and hence along M).
SI unit of M: A⋅m2 (or joule/tesla).
Direction: anticlockwise current, as seen by you, gives M out of the plane; clockwise gives M into the plane.
For a revolving charge q in a circle of radius R with speed v: equivalent current i=qv/(2πR), so M=iA=21qvR.
Figure 1: A positive charge going round anticlockwise is a current loop: i=2πRqv and M=iπR2=21qvR, out of the page. With L=mvR this is M=2mqL.
Exam Trick
Orbiting charge: LM=2mq. With the angular momentumL=mvR, the result M=21qvR becomes M=2mqL, whatever the radius or speed. For a positive charge M is along L; for an electron it points opposite to L. For an electron in a Bohr orbit, L=2πnh gives M=n4πmeeh in size (the Bohr magneton for n=1).
Key idea
Any current loop is a magnetic dipole: M=NIA, along the normal given by the right-hand curl rule.
2. Torque on a Current Loop
Consider a rectangular loop of length L and width b, in uniform B, with the normal A at angle θ to B. The two sides of length L (perpendicular to B) feel equal and opposite forces F=BIL separated by bsinθ, forming a couple:
τ=F⋅(bsinθ)=(BIL)(bsinθ)=BIAsinθ
For N turns: τ=NBIAsinθ. In vector form:
τ=M×Bτ=MBsinθ
Figure 2: The two sides perpendicular to B feel equal and opposite forces F=BIL. Their lines of action are separated by bsinθ, so the couple has moment τ=(BIL)(bsinθ)=BIAsinθ=MBsinθ.Figure 3: The same situation viewed along the rotation axis. Current is out of the page (⊙) on one side and into it (⊗) on the other, so the two forces BIL point oppositely. Only the perpendicular separation bsinθ contributes to the moment, which is why τ∝sinθ.
2.1 Equilibrium positions
θ=0° (M∥B): τ=0, U=−MB (minimum): stable.
θ=180° (M∥−B): τ=0, U=+MB (maximum): unstable.
θ=90°: τ=MB (maximum torque).
Figure 4: Both θ=0° and θ=180° give zero torque, but only 0° is stable. Note that at θ=90° the plane of the loop contains B: this is the maximum-torque case, not the zero-torque case.
This result (torque is M×B) is general: it holds for any planar current loop, not just rectangular. The area vector A carries all the geometric information.
Exam Trick
Plane or normal? If a question gives the angle α between the plane of the coil and B, the angle in the formula is θ=90°−α, so τ=MBcosα.
Figure 5: The angle in τ=MBsinθ is between M (the normal) and B. A loop whose plane lies along B has θ=90° and feels the largest torque; a loop facing the field has θ=0° and feels none.
(Note the sign: the torque tries to decreaseθ, i.e., align M with B.) The corresponding potential energy is:
U(θ)=−M⋅B=−MBcosθ
and the work done by an external agent in rotating the dipole from θ1 to θ2 (quasi-statically):
Wext=U(θ2)−U(θ1)=MB(cosθ1−cosθ2)
Figure 6: τ=MBsinθ peaks at θ=90°, while U=−MBcosθ is a minimum at θ=0° (stable) and a maximum at 180° (unstable). The shaded area under the torque curve is exactly the external work W=MB(1−cosθ).
Rotate from 0° to θ: Wext=MB(1−cosθ).
Rotate from 0° to 180°: Wext=2MB (maximum energy stored).
Rotate from 0° to 90°: Wext=MB.
3.1 Small-oscillation frequency
JEE Advanced
The period of small oscillations, T=2πMBIinertia, is not in the JEE Main 2026 syllabus. JEE Advanced 2026 covers it: the torque on a current loop in a uniform field together with angular simple harmonic motion.
For small angular displacements θ from stable equilibrium, sinθ≈θ, so:
Iinertiaθ¨=−MBθ⟹ω=IinertiaMB, so T=2πMBIinertia
This is the basis of the vibration magnetometer and the equivalent oscillation of a bar magnet in a horizontal field.
Solved Example 1
A circular coil of 12 turns, radius 0.10 m, carries 5 A. It is placed in a uniform B=0.60 T. Find (i) the magnetic moment, (ii) the maximum torque, (iii) the torque when the moment makes 60° with B.
Solution:
Area A=πR2=π(0.10)2=0.0314m2.
(i)M=NIA=12×5×0.0314=1.885A⋅m2.
(ii)τmax=MB=1.885×0.60=1.13N⋅m.
(iii)τ=MBsin60°=1.13×(3/2)≈0.98N⋅m.
Solved Example 2
For a given length L of wire carrying current I, how many circular turns give the maximum magnetic moment, and what is its value?
Solution:
If N turns are made, each has circumference 2πR=L/N, so R=L/(2πN) and A=πR2=L2/(4πN2).
M=NIA=NI⋅4πN2L2=4πNIL2
M decreases with N, so maximum is at N=1: Mmax=4πIL2. A single loop beats any multi-turn coil for a fixed length of wire.
Solved Example 3
A bar magnet of moment M=1.0×10−4 J/T sits in a horizontal field B=4×10−5 T, free to rotate. Find the work done in rotating it slowly from parallel-to-field to 60° from the field.
Solution:
Wext=MB(cos0°−cos60°)=MB(1−0.5)=0.5MB
W=0.5×(1.0×10−4)×(4×10−5)=2×10−9J=2nJ.
Solved Example 4
A rectangular coil of 50 turns, 4cm×2cm, carries 2A in a field of 0.5T. Its plane makes 30° with the field. Find the torque.
Solution:
M=NIA=50×2×(0.04×0.02)=0.08A⋅m2.
The plane is at 30° to B, so the normal is at θ=60°.
τ=MBsin60°=0.08×0.5×0.866≈0.0346N⋅m.
Solved Example 5JEE Advanced
A small magnet of moment 0.2A⋅m2 and moment of inertia5×10−6kg⋅m2 swings slightly about its equilibrium in a field of 0.05T. Find its period. What happens to the period in a field four times as strong?
Solution:
ω=IinertiaMB=5×10−60.2×0.05≈44.7rad/s, so T=ω2π≈0.140s.
T∝B1: in a field four times as strong the period halves.
JEE Advanced
Large swings. Released from rest at angle θ0, a dipole does not move in SHM, but energy is still conserved (the field does work through the torque):
21IinertiaΩ2=MB(cosθ−cosθ0)
Here Ω=dtdθ is the angular speed of the dipole (not the SHM constant ω above). Its greatest value, as the dipole passes θ=0, is Ωmax=Iinertia2MB(1−cosθ0).
Quick Recall: tap to checkWork needed to turn a dipole from 0° to 180°?
2MB.
Potential energy at θ=90°?
Zero, the chosen reference.
How does the period of small swings depend on B?
T∝B1.
Key idea
U=−MBcosθ is lowest when M points along B; the work done by an outside agent is the rise in U.
4. Force on a Dipole in a Non-Uniform Field
Beyond syllabus The force on a dipole in a non-uniform field, F=∇(M⋅B), is in neither the JEE Main 2026 nor the JEE Advanced 2026 syllabus: both list magnetic forces in a uniform field only. Read this section for understanding.
In a uniform field, net force on any closed loop is zero. In a non-uniform field, the two ends of the dipole sit at different field strengths, producing a net force:
Fx=M∂x∂B (along the direction of variation, when M∥B)
More generally: F=∇(M⋅B). This is why a bar magnet is attracted more strongly to the poles of another magnet than to its middle (where the field hardly changes along the magnet).
Figure 7: In a non-uniform field the two poles sit at different field strengths, so the forces no longer cancel. The net force F=∇(M⋅B) drags an aligned dipole towards the region of stronger field. In a uniform field the two forces are equal and the net force is exactly zero.Figure 8: Flowchart for a current loop or magnet in a field: find M, take θ from the normal, then torque, energy and work, or oscillation period.Figure 9: Mind map: magnetic moment, torque, equilibrium, energy, oscillation and non-uniform fields.
Practice Questions
A coil of 10 turns and radius 5cm carries 2A. Find its magnetic moment.Answer: M=NIπR2≈0.157A⋅m2.
The coil of the previous question is placed with its plane along a field of 0.4T. Torque?Answer: MB≈0.0628N⋅m (the largest possible).
How much work turns a magnet of moment 0.5A⋅m2 from along to against a field of 0.2T?Answer: 2MB=0.2J.
An electron moves at 2.2×106m/s on a circle of radius 0.53×10−10m. Find its orbital magnetic moment.Answer: M=21evr≈9.3×10−24A⋅m2 (taking e=1.6×10−19C).
Which describes the potential energy U of a dipole against θ from 0° to 180°? (A) rises as −cosθ from −MB to +MB (B) falls as cosθ from +MB to −MB (C) a sine hump (D) a straight lineAnswer: (A): U=−MBcosθ.
A magnet swings with period T in a field B. The field is doubled. New period? JEE AdvancedAnswer: 2T.
Numerical answer: a magnet of moment 0.3A⋅m2 makes 30° with a field of 0.2T. Torque, in units of 10−2N⋅m?Answer: 3.
Statement I: a current loop in a uniform field feels zero net force. Statement II: its potential energy is least when M is opposite to B. (A) both true (B) I true, II false (C) I false, II true (D) both falseAnswer: (B).
Common Mistakes to Avoid
Watch out
Confusing the angle in the torque formula:θ is the angle between M (normal to the loop) and B, not between the plane of the loop and B. If the loop's plane is parallel to B, then M⊥B and torque is maximum (θ=90°), not zero.
Forgetting the N factor for a multi-turn coil.
Wrong sign of potential energy:U=−M⋅B is minimum (most negative) when M∥B; this is stable equilibrium.
Applying F=M×B in a uniform field: it is the torque, not the force. Net force in a uniform field is zero.
Confusing work done by torque vs work done by external agent: they have opposite signs. Wext=U(θ2)−U(θ1); Wmag=−Wext.
Assuming small-oscillation formula applies for large angles: the SHM ω=MB/I is valid only for small θ. Large-angle motion is periodic but not simple harmonic.
Taking 2MB as the work for a quarter turn: from 0° to 90° the work is MB; 2MB is for a full flip from 0° to 180°.
Mixing up the two I's:I in M=NIA is the current; Iinertia in T=2πIinertia/MB is the moment of inertia.
Frequently Asked Questions
Q1. What is the magnetic dipole moment of a current loop?
For a loop of N turns carrying current I enclosing area A, the magnetic dipole moment is M=NIA, where A is the area vector perpendicular to the loop with direction fixed by the right-hand curl rule from the current direction. SI unit: A⋅m2.
Q2. What is the torque on a current loop in a magnetic field?
τ=M×B, magnitude τ=MBsinθ=NIABsinθ, where θ is the angle between M and B. Maximum torque MB occurs when the loop's plane is parallel to B (θ=90°); zero torque when M∥B or M∥−B.
Q3. Why is the net force on a current loop in a uniform field zero?
For any wire in a uniform field, the net force is I(Lendpoints×B). A closed loop has coincident start and end, so Lendpoints=0 and net force vanishes. The loop can still feel a torque.
Q4. What is the potential energy of a magnetic dipole in a field?
U=−M⋅B=−MBcosθ. Minimum (U=−MB) when M∥B (stable equilibrium); maximum (U=+MB) when M∥−B (unstable). Zero energy is chosen at θ=90°.
Q5. What is the work done in rotating a magnetic dipole in a uniform field?
Work done by an external agent in rotating from θ1 to θ2: Wext=MB(cosθ1−cosθ2). Rotating from stable equilibrium (0°) to θ requires W=MB(1−cosθ); a full flip (0° to 180°) needs W=2MB.
Q6. Why does a current loop behave like a bar magnet?
Both produce the same magnetic field pattern at distances large compared to their size (axial field ∝M/r3), both feel the same torque M×B in an external field, and both have the same potential energy −M⋅B. In fact, at the atomic level, all magnetism arises from electron orbital and spin motion: tiny current loops.
Q7. When can a current loop feel a net force?
Only in a non-uniform magnetic field. Different parts of the loop then sit in different field strengths, so the forces don't cancel. The net force is F=∇(M⋅B); this is why a paper clip is attracted toward the pole of a magnet, not toward its middle.
Q8. What is the frequency of small oscillations of a magnetic dipole in a field?
For small angular deviations θ from stable equilibrium, the restoring torque τ=−MBθ produces SHM with angular frequency ω=MB/Iinertia and period T=2πIinertia/(MB). This principle is used in the vibration magnetometer.
Q9. Is θ in the torque formula measured from the plane of the loop or from the normal?
From the normal (M), not the plane. If the loop's plane is parallel to B (so M⊥B), then θ=90° and torque is maximum. If the loop's plane is perpendicular to B (M∥B), then θ=0° and torque is zero. Confusion here is a very common exam error.